• My customer has problems with my material
My customer has problems with my material
My customer has problems with my material

Problem:

Static charge in a material can cause problems when this material is used for a next production phase e.g. tubular film used to make bags or a film on a roll has to be unwound . Due to static charges on the film, the layers will cling together causing problem when trying to separate the layers.

My customer has problems with my material; solution
My customer has problems with my material; solution

Solution:

When a static charge is in between two layers it is almost impossible to neutralise. Neutralising the static charge on the material has to start as early in the process as possible when the layers are still separate. Throughout the whole production process anti static equipment should be fitted to keep static levels as low as possible, so preventing a static charge build up between the layers.

Products used in this application:Performax Easy

Most common solutions to static problems can be found HERE.

 

Chat with an expert now!

Click on the chat button to immediately find the right solution for your problem regarding static electricity with one of our technical experts. You can both chat and video call with our customer service to describe your situation in the best possible way. No time to chat now? Send an e-mail to our customer service or call us: +31 (0) 573 288333. Would you prefer to contact your local expert? Then take a look at our representatives in your region here!

 

Workers get shocks

Fill in the form and we will contact you
captcha

Want to eliminate industrial static charge and know how to discharge static electricity?

Simco-Ion anti-static bars or static eliminators generate an electrical field which causes the air molecules in the vicinity of the bar to break down into positive and negative ions. Because opposite charges attract, any charged material passing near the bar will attract ions until the charge on the material is neutralized. The materials will no longer be attracted to each other or to the machine parts. Attraction of dust, explosion or fire hazards and electrical shocks to personnel caused by static discharge are avoided. Simco-Ion offers a very wide range of antistatic bars in shockless and non-shockless versions: Performax Easy, Performax IQ Easy, Performax IQ Easy Ex, Performax Easy Ex, ThunderION 2.0, MEB, MEJ, 1/2"SS, MaxION, P-Sh-N and the P-Sh-N-Ex