“Static charge in a material can cause problems when this material is used for a next production phase e.g. tubular film used to make bags or a film on a roll has to be unwound”

The Problem

Static charge in a material can cause problems when this material is used for a next production phase e.g. tubular film used to make bags or a film on a roll has to be unwound . Due to static charges on the film, the layers will cling together causing problem when trying to separate the layers.

The Solution

When a static charge is in between two layers it is almost impossible to neutralise. Neutralising the static charge on the material has to start as early in the process as possible when the layers are still separate. Throughout the whole production process anti static equipment should be fitted to keep static levels as low as possible, so preventing a static charge build up between the layers.

Products used in this application:Performax Easy

Used Device

Performax Easy

The rugged Performax Easy static neutralizing system, with reinforced profile offers superior deflection performance that minimizes damage due to (accidental) bending. The Performax Easy has an integrated high voltage power supply and requires only a low voltage input of 24V DC. It is equipped with a standard M12 connector for the 24V DC input.

Performax Easy

The rugged Performax Easy static neutralizing system, with reinforced profile offers superior deflection performance that minimizes damage due to (accidental) bending. The Performax Easy has an integrated high voltage power supply and requires only a low voltage input of 24V DC. It is equipped with a standard M12 connector for the 24V DC input.

More About The Perfomax Easy

NEWSLETTER

For company news, product updates and releases, subscribe to our newsletter.

Newsletter

GET IN TOUCH!

Simco-ion provides fast, efficient and knowledgeable support. For technical advice or to discuss a custom solution for your application, please get in touch.