-
Typhoon with P-SH-N-EX
The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width of the airknife. In the airknife tube a high air pressure appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-Ex anti-static bar is approved.
- Incorporates Simco-Ion anti-static bars which quickly neutralize static, facilitating easy removal of particulate
- Clean, uniform, high-velocity ionised air provides ‘‘one-step’’ cleaning
- Direct-drive motors require little or no maintenance
- Anodised finish for corrosion protection
- Connection for pressure sensor
- New design extruded aluminium profile
- Cost efficient versus compressed air
- Two mounting grooves
- Small blower/ low noise level
- Approved for use in explosion hazardous zones
- Incorporates Simco-Ion anti-static bars which quickly neutralize static, facilitating easy removal of particulate
- Clean, uniform, high-velocity ionised air provides ‘‘one-step’’ cleaning
- Direct-drive motors require little or no maintenance
- Anodised finish for corrosion protection
- Connection for pressure sensor
- New design extruded aluminium profile
- Cost efficient versus compressed air
- Two mounting grooves
- Small blower/ low noise level
- Approved for use in explosion hazardous zones
Technical specifications
| Working distance | 2000 mm max. |
| Working width | on demand |
| Housing material | Aluminum / steel |
| Ionizing bar material | PVC |
| Emitter pin | special alloy |
| Cable | Neoprene |
| Weight | Basis 2 kg + 4,3 kg/m |
| Ambient temperature | 0 - 40 °C |
| Use circumstances | industrial |
| Operating voltage | 7 kV AC |
| Air connection | 75 mm Ø |
| U primary | 230V 50Hz |
| Suitable power unit | Integrated |
| Approval | UL, ATEX |
| ATEX category | II 2 GD |
| Ex smb IIB T4 | |
| Ex mD 21 T135C | |
| ATEX certificate | BAS00ATEX2162X |
