Typhoon with EP-SH-N

The Typhoon is constructed of extruded aluminium with incorporated mounting grooves. This design provides a precise air volume over the entire width. In the Typhoon a high air pressure is generated and is flowing out of the narrow outflow opening. The anti-static bar produces positive and negative ions, which are blown onto the surface by the Typhoon. The ions will now be exchanged, which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones, the Typhoon with the P-Sh-N-EX anti-static bar is approved.

Air pressure sensor

Each Typhoon system is supplied with an air pressure sensor which can measure the air pressure inside the air knife. If the pressure drops under the required level, the system does not work optimally. A system check is necessary, often the air filter needs to be cleaned.

Power unit A2A7M

Typhoon systems with EP-Sh-N anti-static bars incorporate a power unit type A2A7M. This unit contains an additional 12V power source for connection of the air pressure sensor.

Working distance up to 2000 mm
Surface cleaning
Low operational cost
Low noise

Full control of static electricity in your production process thanks to the IQ Easy Platform


  • Incorporates Simco-ION anti-static bars to quickly neutralize static, facilitating easy removal of dust
  • Clean, uniform, high-velocity ionised air provides ‘‘one-step’’ cleaning
  • Direct-drive motors require little to no maintenance
  • Anodised finish for corrosion protection
  • Connection for pressure sensor
  • New design extruded aluminium profile
  • Cost efficient versus compressed air
  • Two mounting grooves
  • Small blower/ low noise level

Technical specifications

  • Working distance
    Up to 2000 mm
  • Working width
    On demand
  • Housing material
  • Ionising bar material
  • Emitter pin
    Special alloy
  • Cable
    Metal shielded
  • Weight
    4 kg/m
  • Ambient temperature
    0 - 55 °C
  • Use circumstances
  • Operating voltage
    7 kV AC
  • Air connection
    75 mm Ø
  • Suitable power unit
    A2A7S/ A2A7M/ MPM
  • Approval


Product drawing

Receive a 3D Drawing

Enter your e-mail address to receive a 3D drawing by mail (STEP-file).

Download STEP drawing

This field is for validation purposes and should be left unchanged.

Product specifications

User Manual


For company news, product updates and releases, subscribe to our newsletter.


This field is for validation purposes and should be left unchanged.


Simco-ION provides fast, efficient and knowledgeable support. For technical advice or to discuss a custom solution for your application, please get in touch.

Employee of Simco-ION