The ThunderION Control Module provides the power and the control for up to four ThunderION anti-static bars. With this Control Module, you can control all connected ThunderION anti-static bars and check they are working correctly from a central location. The Control Module operates on the mains voltage, which can be turned on and off with a switch. A cable with a pre-assembled connector at each end links the ThunderION anti-static bar with the Control Module. This offers quick and easy assembly. All cables carry just 24 V. The Control Module enables you to check the functioning of each connected anti static bar. A green LED indicates that the bar is switched on. A red LED indicates that a fault has been detected. Via the I/O port, you also have the option of switching each bar on/off remotely and separately, as well as checking its correct functioning.
Chat with an expert now!
Click on the chat button to immediately find the right solution for your problem regarding static electricity with one of our technical experts. You can both chat and video call with our customer service to describe your situation in the best possible way. No time to chat now? Send an e-mail to our customer service or call us: +31 (0) 573 288333. Would you prefer to contact your local expert? Then take a look at our representatives in your region here!
|Housing material|aluminium and steel, powdercoating|
|Connections|four connectors for ThunderION bar one connector for remote I/O|
|On/off switch with lamp|yes|
|High voltage indication|four LED's|
|Cable|1,8 m, 3 conductors|
|Ambient temperature|0 - 50 °C|
|U primairy|100 V or 240 Vac *|
|Frequency|50 or 60 Hz*|
|Power consumption|Max. 100 W|
|U secundairy|24 Vdc|
|I secundairy|2,8 A (4 x 0,7A)|