• TensION

Easy functional check

For anti static devices

For charging devices

Battery operated


The Simco-Ion TensION can be used to check AC/DC Simco-Ion discharging and charging equipment. TensION indicates whether a high voltage is present on the ionising emitters or charging points.


Test Method

Hold the TensION at a distance from the ionising points / emitters. If a high voltage is present, a red indicator in the plastic tip will illuminate. To get an indication of proper functioning of the Simco-Ion equipment all the emitters should be checked.
Minimum distance from the TensION to the ionising emitters or charging points must be obtained. Refer to the table below:

Operating VoltageMinimum distance
3,3 kV5 mm
4 kV6mm
5 kV10 mm
7 kV13 mm
10 kV20 mm
30 kV80 mm

Chat with an expert now!

Click on the chat button to immediately find the right solution for your problem regarding static electricity with one of our technical experts. You can both chat and video call with our customer service to describe your situation in the best possible way. No time to chat now? Send an e-mail to our customer service or call us: +31 (0) 573 288333. Would you prefer to contact your local expert? Then take a look at our representatives in your region here!


  • Convenient high-voltage indicator in pen size
  • There is no need to make contact with the device being controlled
  • The tip of the TensION illuminates when a voltage is detected

Technical specifications

Power2 size AAA batteries (included)
Measuring distancecontactless (see table above)
Weight40 grams
MaterialRadilon-S HS(a), BE 170MO IP64
DimensionsLength 148 mm, diameter maximum 17 mm
Ambient temperature-10°C - +55°C

Product specification


Click here to see our representatives in your region!


Users manual